Henderson, Kentucky
What concrete costs in Henderson
Ranges by job and size, installed, for Henderson County in 2026. They are what these jobs typically run before anyone stands on the ground. After the site visit you get a number in writing, itemized, and it does not move unless the job does.
By the job
What does a concrete driveway cost in Henderson?
- Per square foot, 4-inch broom finish
- $8 - $12 per sq ft
- 20 by 20, new pour
- $3,600 - $5,200
- 20 by 20, tear-out and replace
- $4,800 - $7,000
- Two-car, 40 feet, with apron
- $7,500 - $12,000
- Tear-out and haul-off, per sq ft
- $2 - $4 per sq ft
- Apron only
- $900 - $2,200
What moves it: tear-out, thickness (five inches with rebar for trailers and heavy trucks), the base depth the clay calls for, and how far the truck is from the plant. The job itself is on the concrete driveways in Henderson page.
What does a concrete patio cost in Henderson?
- 12 by 12, broom finish
- $1,500 - $2,200
- 20 by 20, broom finish
- $3,600 - $5,000
- Exposed aggregate, per sq ft
- $12 - $17 per sq ft
What moves it: back-yard access (buggy, wheelbarrow or pump), a step or landing at the door, and the shape. The job is on the concrete patios in Henderson page.
How much does stamped concrete cost?
- Stamped, per sq ft
- $16 - $24 per sq ft
- 20 by 20 stamped patio
- $6,500 - $9,500
- Reseal, every 2 to 3 years
- $350 - $700
What moves it: pattern complexity, borders, a second color, and crew size on pour day. The honest maintenance picture is on the stamped concrete in Henderson page.
What does a pole barn floor or garage slab cost in Henderson County?
- Slab, per sq ft
- $7 - $11 per sq ft
- 30 by 40 pole barn floor
- $8,500 - $13,000
- 40 by 60 pole barn floor
- $16,000 - $24,000
- 24 by 24 garage slab, thickened edge
- $5,500 - $8,000
- 10 by 12 shed pad
- $1,100 - $1,700
What moves it: fill to bring a low site up, thickness and rebar for what will park on it, a vapor barrier, and floor drains. The job is on the concrete slabs and pole barn floors page.
How much do a sidewalk, steps or a stoop cost?
- Sidewalk, 4 ft wide, per running ft
- $40 - $55 per linear ft
- Steps, one flight of 3 or 4, poured in place
- $1,200 - $2,800
- Small stoop or landing
- $1,500 - $3,500
What moves it: tearing out the old walk, a tall porch, railings, and tree roots to bridge. The job is on the concrete sidewalks, steps and porches in Henderson page.
What does concrete repair or removal cost?
- Crack routing and sealing
- $250 - $900
- Scaling and spalling patch
- $400 - $1,200
- Resurfacing, per sq ft
- $4 - $8 per sq ft
- Removal and haul-off, per sq ft
- $2 - $4 per sq ft
- Typical two-car driveway removal
- $1,200 - $2,800
What moves it: whether the slab is moving (repairs on a moving slab do not hold), thickness and rebar in what is coming out, and access. The repair-or-replace read is on the concrete repair and replacement in Henderson page.
What does commercial concrete cost?
- Commercial flatwork, per sq ft
- $9 - $15 per sq ft
- Dumpster pad
- $2,500 - $6,000
- Curb and gutter, per running ft
- $30 - $45 per linear ft
What moves it: the spec, the truck traffic it has to carry, after-hours scheduling, and the plans. Quoted from a site visit; the work is on the commercial concrete in Henderson page.
Timelines
How long before the concrete can be used?
Walk on it in 24 to 48 hours. Park a car on a driveway after 7 days. Full design strength at 28 days, which is when heavy trucks and trailers go on it. Cold weather in October and November stretches all three.
Season
When can the job be scheduled?
April through November. A quote written in the winter holds for a spring date. The busiest weeks are May and June for patios and driveways, and September for barn floors before harvest traffic; asking early gets the date you want.
Asked and answered
Price questions from Henderson callers
How much is a 20 by 20 concrete driveway in Henderson?
$3,600 - $5,200 as a new pour on prepared ground, $4,800 - $7,000 when the old driveway comes out first. Those are Henderson County numbers for four-inch broom-finished concrete on a compacted base, installed.
How much does a 12 by 12 slab cost?
For a 12 by 12 patio, $1,500 - $2,200. For a 12 by 12 shed or equipment pad with no finish work, a little less, and a 10 by 12 shed pad runs $1,100 - $1,700. The difference is the edge finish, the slope work and whether the truck can reach it.
What does concrete cost per square foot in Henderson?
Broom-finished flatwork runs $8 - $12 per sq ft installed for a driveway and $7 - $11 per sq ft for a barn or garage slab, where the square footage is bigger and the edges are simpler. Stamped runs $16 - $24 per sq ft. Tear-out of an old slab adds $2 - $4 per sq ft.
How are concrete jobs priced, by the hour or by the job?
By the job, on a written quote, after a site visit. Hourly makes no sense for concrete because the truck, the crew size and the finish are all set before the pour starts. The quote lists tear-out, base, thickness, steel, finish, joints and haul-off as their own lines, so a lower number from someone else can be read for what it left out.
What is the price of concrete per yard around here?
That is the question for a ready-mix plant, and it is the wrong number for a homeowner. A yard of delivered mix is a fraction of what a finished slab costs, because the base, the forms, the steel, the labor and the finish are the job. If you are pouring your own forms, Meuth or Dixon & Melton will quote a yard price. If you want the slab done, the ranges on this page are the ones that matter.
Free estimate
Get the written number
The ranges above are the honest starting point. The site visit turns one of them into a single figure, itemized, in writing. Say what the job is and roughly how big.
Rather talk it through? Call (270) 714-3029. If nobody picks up, leave the address and the job and you get a call back.
- Measured on site before the number is final
- Tear-out, base, finish and haul-off itemized
- Pour dates set by the weather, in writing